Hi guys, I have a problem that I can not solve. I built a Aeroquad with ArduinoMega. I used the ESC consumer and I think the problem is around them. The configurator can not calibrate the ESC, the motors remain stationary. When I try to give 20% gas engines run at different speeds and sometimes one or two are still up to 50% of the gas. Help me, I would not buy back the ESC if the problem could be another. Thank you Pier
Hello Aeroquad Im new to this website but decided to build the quad copter for my project. I will be on here frequently and when I experience problems for advice. I have wrote my project description and was wondering if anyone had some advice on a starting point, or any suggestions to change in my project description before I began my project? Project Description This project will be dedicated to the design and construction of a remote or cpu controlled four rotor ...
Started building the frame, awaiting the electronics. So far this is what I have to work with: .5x19.5in aluminum C channel arms ($1/ft) ABS plastic upper and lower mount plate ($3 used battery box) 4-40 nylon nuts, bolts, and rod T-Rex 600 landing skids That's it for the hard parts, electronics on hand: Dx5e transmitter and receiver (crashed CX3) (Experience - priceless ) 2.4Ghz Pinhole camera and receiver (again, crashed CX3) ...
Updated 09-03-2010 at 12:56 AM by Twidget
Hi all, Checkout the new Spektrum DX8. I know that is is pricy, but it includes basic telemetry that can indicate on the transmitter display when to shut down your quadrarotor. http://www.spektrumrc.com/Products/D...ProdID=SPM8800 Regards, TCIII
Updated 08-31-2010 at 11:51 AM by TCIII (Can't type this early in the morning!)
Originally Posted by coolbloke1324 Hi, I'd love to build one of these... or a whole army, but it would be great if there was an option in the store to just purchase EVERYTHING you need. A whole kit. You could have a few different "stock" configurations like "light lifting", "heavy lifting" etc... or if you really want to be adventurous, create a quad builder page that allows the customer to select all the requirements and it creates the order for you. Ultimately, like many ...
Recent Comments
